Rigid cage 4 parts 140 and 150 cm

MINIPLANE Rigid Cage assembling

assembling on 2016 and M4 frame

4 parts version, 140 and 150 cm

drill the lower part of the frame supplied with the cage in 4 parts, measuring first, to center the existing hole in the inner tube

assemble the 2 lower part of the cage

after having assembled and fastened the two upper sections between them, punt in place on the frame and than using a 4mm bit, drill the two upper sections of the cage in correspondence with the holes already present on the frame, in order to insert the clips.

insert the 2 M10 fittings using a 6MA screw,
when you will remove the screws the fittings will remain in place on the frame.

to obtain the best adjustment, perhaps a countersink will be useful

to protect the lines, apply the provided adhesive on the joint,
gently pulling in the direction of the arrows

to protect the threads that are not used, you can screw the supplied plastic screws

< Prev		Next >

Last Updated (Friday, 09 November 2018 13:40)